1 confguration ? connector 1: n male ? connector 2: n male ? cable type: pe-p142ll features ? 83% v elocity of propagation ? shielding ef fectiveness > 95 db ? maximum vswr is < 1.35:1 to 18 ghz ? minimum bend radius of 1 inch ? operating temperature range of -55 to +125 c ? rohs and reach compliant ? same day shipment of custom lengths ? 100% continuity , hi-pot, and rf tested 0.195 (fep) 0.320 (stainless steel) . description the pe340 series high performance test cables 0.195 inch diameter and 83% phase velocity offer very low loss performance up to 18 ghz. the durable stainless stell connectors and fep jacket provide a cost effective design ideal for test environments where a rugged cabel assembly is required. the series is offered with type n, tnc, and sma connectors all rated to 18 ghz. a heavy duty boot provides improved strain relief and adds the durability of the cable assemblies. these cable assemblies and built using a double shielded fexible cable, providing excellent shielding effectiveness of greater than 95 db. all pe340 cable assemblies are 100% continuity, hi-pot, and rf tested to published specifcations. custom lengths are built to order and shipped same day. electrical specifcations description minimum t ypical maximum units frequency range dc 18 ghz vswr 1.35:1 velocity of propagation 83 % rf shielding 95 db capacitance 25 [82.02] pf/ft [pf/m] . click the following link (or enter part number in search on website) to obtain additional part information including price, inventory and certifcations: n male to n male low loss test cable 50 cm length using pe-p142ll coax, rohs PE343-50CM PE343-50CM rev 1.2 n male to n male low loss test cable 50 cm length using pe-p142ll coax, rohs rf cable assemblies technical data sheet PE343-50CM
2 specifcations by frequency description f1 f2 f3 f4 f5 units frequency 1 2 5 10 18 ghz insertion loss (max.) 0.58 0.64 0.74 0.88 1.06 db power handling (max.) 700 400 300 220 160 watts . electrical specifcation notes: power handling values are calculated based on cable properties. power handling will vary based on the actual vswr of the cable assembly. mechanical specifcations cable assembly length* 19.685 in [500 mm] diameter 0.822 in [20.88 mm] . weight 0.0632 lbs [28.67 g] cable cable type pe-p142ll impedance 50 ohms inner conductor type solid inner conductor material and plating copper , silver dielectric type ptfe number of shields 3 shield layer 1 silver plated copper tape shield layer 2 aluminum polyester shield layer 3 silver plated copper wire jacket material fep , green jacket diameter 0.195 in [4.95 mm] . repeated minimum bend radius 1 in [25.4 mm] PE343-50CM rev 1.2 click the following link (or enter part number in search on website) to obtain additional part information including price, inventory and certifcations: n male to n male low loss test cable 50 cm length using pe-p142ll coax, rohs PE343-50CM rf cable assemblies technical data sheet PE343-50CM n male to n male low loss test cable 50 cm length using pe-p142ll coax, rohs
3 connectors description connector 1 connector 2 type n male n male impedance 50 ohms 50 ohms contact material and plating beryllium copper , gold beryllium copper , gold contact plating specifcation astm-b488, 50 inch. astm-b488, 50 inch. dielectric type ptfe ptfe outer conductor material and plating passivated stainless steel passivated stainless steel outer conductor plating specifcation sae-ams-2700 sae-ams-2700 coupling nut material and plating passivated stainless steel passivated stainless steel coupling nut plating specifcation sae-ams-2700 sae-ams-2700 hex size 3/4 inch 3/4 inch torque 14 in-lbs [1.58 nm] 14 in-lbs [1.58 nm] . mechanical specifcation notes: *all cable assemblies have a length tolerance of 1.5% or 3/8, whichever is greater. environmental specifcations temperature operating range -55 to +125 deg c compliance certifcations (see product page for current document) plotted and other data notes: ? values at 25c, sea level. PE343-50CM rev 1.2 click the following link (or enter part number in search on website) to obtain additional part information including price, inventory and certifcations: n male to n male low loss test cable 50 cm length using pe-p142ll coax, rohs PE343-50CM rf cable assemblies technical data sheet n male to n male low loss test cable 50 cm length using pe-p142ll coax, rohs PE343-50CM
4 how to order part number confguration: pe343 - xx uu | | | unit of measure: | | cm = centimeters | | = inches | length | base number example: pe343-12 = 12 inches long cable pe343-100cm = 100 cm long cable n male to n male low loss test cable 50 cm length using pe-p142ll coax, rohs from pasternack enterprises has same day shipment for domestic and international orders. our rf, microwave and millimeter wave products maintain a 99.4% availability and are part of the broadest selection in the industry. click the following link (or enter part number in search on website) to obtain additional part information including price, inventory and certifcations: n male to n male low loss test cable 50 cm length using pe-p142ll coax, rohs pe343- 50cm url: https://www.pasternack.com/n-male-n-male-pe-p142ll-cable-assembly-PE343-50CM-p.aspx PE343-50CM rev 1.2 rf cable assemblies technical data sheet n male to n male low loss test cable 50 cm length using pe-p142ll coax, rohs PE343-50CM
5 PE343-50CM rev 1.2 n male to n male low loss test cable 50 cm length using pe-p142ll coax, rohs PE343-50CM cad drawing
|
